http://public.fotki.com/BlueTTop/mods/lcr-splitter/ OEM front splitter for Seat Leon Cupra R (Part # 1ML 805 903 ) installed on TT WARNING: Do NOT purchase this item from any company with the name "GOINGFAST"! I recommentd purchase here - http://oempl.us/index.php?main_page=product_info&products_id=64 All Stainless Steel hardware used: - 2 M6 x 1.00 SS hex-head bolts 35-40mm long - for center supports - 8 M6 x 1.00 SS hex-head bolts 16-20mm long - 20 SS 6mm flat washers - 10 SS 6mm lock washers - 10 SS 6mm x 1.00 nuts NOTE: Self Tapping SS screws can be used in place of above list. Tools needed: - Drill and 6mm drill bit (15/64" will work) for drilling holes in splitter and bumper - 10mm wrench and 10mm deep socket - Painters Tape - Ruler - Dremel with grinding / sanding tip http://images.fotki.com/logo3.gif http://public.fotki.com/BlueTTop/mods/lcr-splitter/ http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04444.html The splitter arrived
]]> http://images35.fotki.com/v1172/photos/1/168597/5124433/DSC04444-th.jpg Wed, 28 May 2008 08:45:46 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04448.html LCR Splitter next to TT.
]]> http://images36.fotki.com/v1176/photos/1/168597/5124433/DSC04448-th.jpg Wed, 28 May 2008 08:45:55 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04447.html LCR Splitter next to TT.
]]> http://images36.fotki.com/v1176/photos/1/168597/5124433/DSC04447-th.jpg Wed, 28 May 2008 08:46:09 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04449.html Part #1ML 805 903 located on the bottom of splitter
]]> http://images41.fotki.com/v1341/photos/1/168597/5124433/DSC04449-th.jpg Wed, 28 May 2008 08:46:22 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04664.html Hardware used was all Stainless Steel. A total of 10 - 6mm x 1.00 bolts (2 - 35mm long, 8 - 16mm long), 10 - 6mm x 1.00 nuts, 20 - 6mm flat washers, and 10 - 6mm lock washers.
]]> http://images34.fotki.com/v1194/photos/1/168597/5124433/DSC04664-th.jpg Wed, 28 May 2008 08:46:38 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04621.html 1st Step: Find the center of both the Splitter and the Bumper
]]> http://images34.fotki.com/v1195/photos/1/168597/5124433/DSC04621-th.jpg Tue, 27 May 2008 12:03:32 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04622.html Center of the splitter shown between the 2 center supports
]]> http://images33.fotki.com/v1189/photos/1/168597/5124433/DSC04622-th.jpg Tue, 27 May 2008 13:02:01 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04609.html I used cloth tape to find the center of the bumper. Painters tape (blue) was used to hang the cloth tape so that it was centered on the Audi rings and the lower mesh grill.
]]> http://images33.fotki.com/v1186/photos/1/168597/5124433/DSC04609-th.jpg Wed, 28 May 2008 08:47:04 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04610.html The cloth tape was first hung from the opened hood (like a plumb bob). I centered on the Audi Rings.
]]> http://images34.fotki.com/v1191/photos/1/168597/5124433/DSC04610-th.jpg Wed, 28 May 2008 08:47:30 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04613a.html Blue painters tape applied to lower bumper.
]]> http://images33.fotki.com/v1189/photos/1/168597/5124433/DSC04613a-th.jpg Wed, 28 May 2008 08:47:47 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04614.html Center of bumper marked on painters tape. Check center by counting holes in lower grill to make sure it is lined up.
]]> http://images34.fotki.com/v1191/photos/1/168597/5124433/DSC04614-th.jpg Wed, 28 May 2008 08:48:24 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/lcrcloseup-1.html Both center supports need to be cut. I took them down to 15mm above the splitter surface.
]]> http://images36.fotki.com/v1177/photos/1/168597/5124433/LCRCloseup-th.jpg Tue, 27 May 2008 23:40:44 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04653.html Close up of center support after cutting.
]]> http://images33.fotki.com/v1185/photos/1/168597/5124433/DSC04653-th.jpg Tue, 27 May 2008 23:41:02 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04657.html A dremel was used to grind off the raised part of every tab. 6mm holes were drilled through center supports and every other tab.
]]> http://images35.fotki.com/v1168/photos/1/168597/5124433/DSC04657-th.jpg Tue, 27 May 2008 13:02:16 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/drillholes.html Drill 6mm holes through these tabs.
]]> http://images34.fotki.com/v1145/photos/1/168597/5124433/DrillHoles-th.jpg Tue, 27 May 2008 23:41:26 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04656.html 6mm Hole Drilled in tab.
]]> http://images36.fotki.com/v1177/photos/1/168597/5124433/DSC04656-th.jpg Tue, 27 May 2008 23:41:34 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04655.html Close up of hole drilled through center support. 35mm long bolts were used on both supports.
]]> http://images36.fotki.com/v1181/photos/1/168597/5124433/DSC04655-th.jpg Tue, 27 May 2008 13:02:41 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04623.html Blue Painters tape used to position Splitter. Tape also applied to protect leading edge of Splitter during installation.
]]> http://images33.fotki.com/v1190/photos/1/168597/5124433/DSC04623-th.jpg Tue, 27 May 2008 13:02:54 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04624.html With the Splitter in final position mark ends to be cut to match up with fender trim piece. Also mark locations where holes need to be drilled in bottom of bumper.
]]> http://images33.fotki.com/v1188/photos/1/168597/5124433/DSC04624-th.jpg Tue, 27 May 2008 23:42:03 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04663.html Carefully measure and cut each end of the Splitter to match-up with fender trim. I removed +/- 50mm (MEASURE SPLITTER WHILE ON CAR). A dremel was used to grind off material from remaining ends so the Splitter fit around fender trim.
]]> http://images36.fotki.com/v1178/photos/1/168597/5124433/DSC04663-th.jpg Tue, 27 May 2008 23:42:18 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04669.html SS bolts & washers installed from inside of bumper. Splitter can now be fitted, adjusted, and fixed in place with 6mm SS washer, lock-washer, and nut.
]]> http://images34.fotki.com/v1194/photos/1/168597/5124433/DSC04669-th.jpg Tue, 27 May 2008 23:42:38 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04694.html Splitter installed on bolts through bumper. Held on the underside with SS washer, lock-washer, and nut.
]]> http://images36.fotki.com/v1180/photos/1/168597/5124433/DSC04694-th.jpg Tue, 27 May 2008 23:42:53 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04629.html Splitter end has been cut to match the contour of the fender trim.
]]> http://images34.fotki.com/v1192/photos/1/168597/5124433/DSC04629-th.jpg Tue, 27 May 2008 23:43:01 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04679.html Splitter end fits up to fender trim piece.
]]> http://images35.fotki.com/v1172/photos/1/168597/5124433/DSC04679-th.jpg Tue, 27 May 2008 23:43:15 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04645a.html Splitter installed. Everything looks to be lined up and even.
]]> http://images36.fotki.com/v1184/photos/1/168597/5124433/DSC04645a-th.jpg Tue, 27 May 2008 13:00:31 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04647a.html View from the side.
]]> http://images33.fotki.com/v1187/photos/1/168597/5124433/DSC04647a-th.jpg Tue, 27 May 2008 23:43:33 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04680.html Painters tape removed. Lower grills to be installed.
]]> http://images44.fotki.com/v1407/photos/1/168597/5124433/DSC04680-th.jpg Tue, 27 May 2008 23:43:39 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04675.html Splitter installed.
]]> http://images35.fotki.com/v1172/photos/1/168597/5124433/DSC04675-th.jpg Tue, 27 May 2008 23:43:46 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04740a.html Finished!
]]> http://images35.fotki.com/v1167/photos/1/168597/5124433/DSC04740a-th.jpg Tue, 27 May 2008 23:43:57 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04727a.html Splitter install finished.
]]> http://images36.fotki.com/v1175/photos/1/168597/5124433/DSC04727a-th.jpg Tue, 27 May 2008 13:01:31 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04747a.html Close up of Splitter installed.
]]> http://images36.fotki.com/v1178/photos/1/168597/5124433/DSC04747a-th.jpg Tue, 27 May 2008 23:44:12 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04725.html DSC04725
]]> http://images36.fotki.com/v1175/photos/1/168597/5124433/DSC04725-th.jpg Tue, 27 May 2008 23:44:20 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04745.html DSC04745
]]> http://images33.fotki.com/v1189/photos/1/168597/5124433/DSC04745-th.jpg Tue, 27 May 2008 12:04:45 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04718.html DSC04718
]]> http://images34.fotki.com/v1194/photos/1/168597/5124433/DSC04718-th.jpg Wed, 28 May 2008 00:48:30 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/dsc04720a.html DSC04720a
]]> http://images34.fotki.com/v1192/photos/1/168597/5124433/DSC04720a-th.jpg Wed, 28 May 2008 00:48:38 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/p1010826.html coTTsie
]]> http://images34.fotki.com/v1194/photos/1/168597/5124433/P1010826-th.jpg Tue, 27 May 2008 22:54:16 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/seatlip.html Installed on the MKIV R32
]]> http://images35.fotki.com/v1128/photos/1/168597/5124433/seatlip-th.jpg Sun, 6 Jan 2008 04:21:06 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/0308z2003seatleoncu.html The original Seat Leon Cupra R
]]> http://images32.fotki.com/v1103/photos/1/168597/5124433/Leon_Cupra_RFront_Side_Driving1-th.jpg Wed, 28 May 2008 00:48:54 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/a4cupralip.html Seat Leon Cupra R splitter
]]> http://images36.fotki.com/v1174/photos/1/168597/5124433/A4_Cupra_Lip-th.jpg Wed, 28 May 2008 00:49:02 GMT http://public.fotki.com/BlueTTop/mods/lcr-splitter/crw5992vijpg1199841491.html BlueHeaven
]]> http://images35.fotki.com/v1197/photos/1/168597/5124433/CRW_5992vi_jpg1199841491-th.jpg Wed, 28 May 2008 00:49:10 GMT